Your fridge may come with a water filter, but if it gets full of sediment, it’s time to change it. Luckily, most new refrigerators now have an indicator to tell you when it’s time to replace the filter. Some even check the water filter’s status and only turn on when it’s dirty. Most manufacturers recommend changing your filter every six months, so it’s worth checking the label to make sure that your filter is still good. get redirected here .
When changing your refrigerator’s water filter, look for a sticker or an indicator light that indicates it’s time to replace it. The filter should be replaced every six months, but if you don’t, it can let contaminants enter the water and affect the taste. Even if your refrigerator water taste doesn’t have any distinct flavor, it may still be contaminated. Fortunately, changing your filter is an easy task, and the replacement process is different for every brand.
Remove the filter cap, if applicable. This can be reused for a new filter. Be sure to match the arrows on your new filter to avoid getting the filter stuck. Insert the new filter in the slot. Make sure the O-rings are covered and secure before you remove the old filter. You can use a towel to soak up the water that drips from the filter. Turn the filter cap clockwise and place the new filter. You can then twist the filter handle back into place.
Many refrigerator water filters use activated carbon, which contains oxygen to open pores. These pores trap volatile organic compounds and microorganisms, such as salmonella, which can be harmful to your health. According to a study by the Natural Resources Defense Council, 18 million Americans have lead violations, EPA restrictions on chemicals, and chemical byproducts. When the carbon becomes clogged, the water filter no longer has the ability to remove these contaminants. Once clogged, bacteria grow in the filter, putting your family at risk.
Once you have removed the old filter, it’s time to replace it. Remove the new filter from its packaging and remove the O-rings. Insert the new water filter in the grille and rotate counterclockwise until it locks into place. If your refrigerator has a water shutoff valve, open it to the right. Use a towel to absorb any water that may drip out. Once you’ve replaced the water filter, turn on the water heater and hold the water shutoff valve until the filter is in place.
The first sign that you should change your refrigerator water filter is a water dispenser that leaks. If the water dispenser is leaking, this means the filter is clogged. In addition to dirt, bacteria, and mold may grow in the water line and cause a leak. Other reasons include a cracked water line, loose connection, or loose connections. This problem is often easy to solve, but there are a few things you can do to ensure your refrigerator water filter is clean and efficient.
